Cc Rev To Gpm Calculator

Cc Rev To Gpm Formula:

\[ GPM = \frac{CC/Rev \times RPM}{3785.41} \]

GPM (gallons per minute):

Unit Converter ▲

Unit Converter ▼

From:	To:

1. What is the Cc Rev To Gpm Calculation?

The Cc Rev To Gpm calculation converts flow rate from cubic centimeters per revolution (cc/rev) to gallons per minute (gpm) based on rotational speed (RPM). This conversion is essential in hydraulic systems, pump performance analysis, and fluid dynamics applications where different measurement units are used.

2. How Does the Calculator Work?

The calculator uses the conversion formula:

\[ GPM = \frac{CC/Rev \times RPM}{3785.41} \]

Where:

\( GPM \) — Gallons per minute (output)
\( CC/Rev \) — Cubic centimeters per revolution (input)
\( RPM \) — Revolutions per minute (input)
\( 3785.41 \) — Conversion factor (cubic centimeters per US gallon)

Explanation: The formula converts the volumetric displacement per revolution combined with rotational speed into a flow rate measurement in gallons per minute.

3. Importance of Flow Rate Conversion

Details: Accurate flow rate conversion is crucial for system design, pump selection, performance monitoring, and ensuring compatibility between components using different measurement systems in hydraulic and fluid transfer applications.

4. Using the Calculator

Tips: Enter CC/Rev value in cubic centimeters per revolution and RPM value in revolutions per minute. Both values must be positive numbers for accurate calculation.

5. Frequently Asked Questions (FAQ)

Q1: Why is 3785.41 used as the conversion factor?
A: 3785.41 represents the number of cubic centimeters in one US gallon, which is the standard conversion factor between these volume units.

Q2: Can this calculator be used for any type of pump?
A: Yes, this calculation applies to any positive displacement pump where the displacement per revolution is known in cc/rev units.

Q3: What are typical CC/Rev values for hydraulic pumps?
A: Hydraulic pump displacements typically range from 5 cc/rev for small pumps to over 200 cc/rev for large industrial pumps.

Q4: How accurate is this conversion?
A: The conversion is mathematically precise. However, actual pump performance may vary due to efficiency factors, viscosity, and system pressure.

Q5: Can this be used for metric to imperial conversions?
A: Yes, this specifically converts from metric units (cc/rev) to US customary units (gpm), which is common in international engineering applications.